WESAL SPC
What we supply

Scope of supply

Eight material groups covering the bulk of what an operating plant, a shutdown or a construction package needs. Every line is quoted against the governing code, not against a generic description.

The categories below are where most of our enquiries sit. If an item is outside them, send it anyway — the sourcing method does not change, and we will say plainly if we are not the right route for it.

Valves and Actuation

Gate, globe, ball, butterfly, check, plug, needle and control valves for upstream, midstream and downstream duty, together with pneumatic, electric and manual actuation. We quote to the governing standard and pressure class rather than to a loose description, and we confirm trim, seat material and end connection in writing before an order is placed — that single step prevents most of the rejections we see at site.

Typical scope and standards

  • API 6D, API 600, API 602, API 608 and BS/EN equivalents as the specification requires
  • Classes 150 through 2500, with API 6A items where wellhead duty applies
  • Carbon steel, stainless, duplex and super duplex, Inconel and Monel trims
  • Fire-safe and fugitive-emission certified types where the service demands it
  • Actuators, gearboxes, limit switches and solenoid valves supplied as a package

Piping, Fittings and Flanges

Line pipe, seamless and welded pipe, butt-weld and forged fittings, flanges, gaskets, studbolts and the complete bulk material take-off behind a piping package. Supplied against ASME and API codes with mill certification, and consolidated so that a tie-in or a spool arrives as one delivery rather than as a dozen part-shipments.

Typical scope and standards

  • ASME B16.5, B16.9, B16.47, B36.10 / B36.19; API 5L line pipe in the usual grades
  • Carbon steel, low-temperature carbon steel, stainless, duplex and alloy grades
  • EN 10204 3.1 and, where specified, 3.2 certification with heat-number traceability
  • Gaskets, spiral wound, ring-type joints, studbolts and nuts to match the rating
  • HDPE, GRP and lined piping systems for water and effluent service

Instrumentation and Control

Pressure, temperature, level and flow instruments, control valves, analysers and the hook-up material that goes with them. Hazardous-area certification is checked against the area classification on the data sheet before we quote, including the gas group and temperature class, because an instrument with the wrong Ex marking is scrap on arrival.

Typical scope and standards

  • Transmitters, gauges, switches, thermowells, RTDs and thermocouples
  • Flow measurement — orifice, coriolis, magnetic, ultrasonic and turbine
  • ATEX and IECEx certified equipment for Zone 0, 1 and 2 areas
  • Control valves, positioners, regulators and pressure-relief devices
  • Impulse tubing, fittings, manifolds and complete hook-up kits

Electrical Equipment

Low and medium voltage distribution, motor control, protection and the cabling and accessories behind them, for plant extensions, substations and routine replacement. Equipment is specified to the client’s own electrical standard and area classification, and we hold the manufacturer to the drawing and test-certificate schedule agreed at order.

Typical scope and standards

  • LV and MV switchgear, distribution boards and motor control centres
  • Transformers, UPS systems, battery chargers and power supplies
  • Protection relays, metering, control and automation items
  • Ex d and Ex e rated equipment, light fittings, junction boxes and glands
  • Power, control and instrument cable, trays, ladders and accessories

Rotating Equipment and Pumps

Centrifugal, positive-displacement, dosing and submersible pumps, plus the seals, bearings, couplings and spare parts that keep existing machines running. For spares we work from the machine serial number and the manufacturer’s parts list, so that what arrives fits the machine actually installed rather than the catalogue model.

Typical scope and standards

  • API 610, API 674 and API 675 pumps; ISO 5199 and ANSI process pumps
  • Mechanical seals and seal support systems to API 682
  • Compressors, blowers, gearboxes and their consumable spares
  • Bearings, couplings, shafts, impellers and wear parts
  • Serial-number-matched OEM spares with the original parts-list reference

Wellhead and Drilling Items

Wellhead and Christmas-tree components, drilling and completion consumables and the associated pressure-control items. This category carries the heaviest certification burden of anything we supply, and we treat the documentation package as part of the delivery rather than as paperwork that follows later.

Typical scope and standards

  • API 6A wellhead components, valves, spools and adapters
  • API 16A and 16C pressure-control and flowline items
  • Drilling consumables, handling tools and rig supplies
  • Completion accessories, packers and associated elastomers
  • Material test reports, hardness testing and NACE MR0175 compliance where required

Safety, Fire and PPE

Personal protective equipment, fall protection, gas detection, breathing apparatus and fixed and portable fire-fighting equipment. Items in this group are supplied with current certification and, where the equipment has a shelf life or a service interval, with the remaining life stated at the time of quotation rather than discovered at goods-in.

Typical scope and standards

  • Head, eye, hand, foot and body protection to EN and ANSI standards
  • Fall arrest, harnesses, lifelines and confined-space equipment
  • Portable and fixed gas detection, calibration gases and spares
  • SCBA, escape sets, resuscitation and rescue equipment
  • Extinguishers, hoses, nozzles, foam and fire-system components

Chemicals, Lubricants and Consumables

Process and treatment chemicals, lubricants, welding consumables, filtration and the general maintenance consumables that a plant orders repeatedly. These are the items best handled under a framework arrangement: agreed prices, agreed lead times and call-off against a single order rather than a new enquiry every month.

Typical scope and standards

  • Water and wastewater treatment chemicals, membranes and filtration media
  • Lubricants, greases, hydraulic fluids and specialty cleaners
  • Welding consumables, electrodes, wire and gases
  • Filters, strainers, elements and separation media
  • Hand tools, abrasives, fasteners and general workshop consumables
With every order

The documentation that comes with the goods

What arrives with a shipment is as important as the shipment. The package is agreed at order stage and assembled before despatch, so that goods-in and the inspector have what they need on day one.

Material certification

EN 10204 type 3.1 as standard, type 3.2 with third-party endorsement where the purchase order calls for it.

Test and inspection reports

Pressure, NDT, hardness, PMI and functional test records as applicable to the item.

Conformity and traceability

Certificates of conformity, heat numbers and serial numbers traceable back to the purchase order line.

Shipping and customs set

Packing list, invoice, certificate of origin and the documents needed for clearance at destination.

Send us your material take-off

An item list, a data sheet or a marked-up drawing is enough to start. We will come back with a quotation or with the questions that need answering first.

Request a quotation